MU One Piece Connector
mu
MU with 2.0mm Cable boot
MU One Piece Connector
mu
MU with 1.0mm Fiber boot
MU One Piece Connector
mu
MU w/ 1.0mm Fiber Short boot
MU Connector kit
mu
MU Kit w/ 2.0mm Cable boot
MU Crimp Tool
mu
MU Crimp Tool
Backboard & Package Housing
mu
MU Backboard & Package Housing

MU One Piece Connector

mu

The SENKO family of singlemode and multimode MU connectors and adapters are fully intermateable with NTT-MU style products, and are NTT and JIS compliant.* This small form factor connector is approximately half the size of the SC connector, and has a push-pull style design. The connector features a pre-assembled body and precision molded plastic housing, and a freefloating ferrule measuring 1.25mm O.D. held in place with a precision spring.

Housing and boot are made from UL-rated material. The MU-J style connector is the same as the regular MU connector, but without the outer housing, and with a very narrow, short boot for 900 micron fiber, ideal for back panel solutions and high-density situations.

SENKO MU Connectors are available in pre-assembled (one-piece) versions or unassembled kits. *When terminated using SENKO recommended procedures.

Applications

  • CATV
  • Metro
  • Active device termination
  • Premise Installations
  • Telecommunication networks
  • Local Area Networks (LANs)
  • Data processing networks
  • Premise installations
  • Wide Area Networks (WANs)
  • Industrial, medical & military

Features

  • NTT-MU hardware compatibility
  • NTT & JIS compliance*
  • Compact, pull-proof design
  • High precision alignment
  • One piece construction
  • Tunable zirconia connector ferrule
  • Corrosion resistant body
  • UL-Rated plastic housing and boot
  • Universal Duplex Clip
  • Low insertion loss & back reflection*

MU One Piece Connector

mu

The SENKO family of singlemode and multimode MU connectors and adapters are fully intermateable with NTT-MU style products, and are NTT and JIS compliant.* This small form factor connector is approximately half the size of the SC connector, and has a push-pull style design. The connector features a pre-assembled body and precision molded plastic housing, and a freefloating ferrule measuring 1.25mm O.D. held in place with a precision spring.

Housing and boot are made from UL-rated material. The MU-J style connector is the same as the regular MU connector, but without the outer housing, and with a very narrow, short boot for 900 micron fiber, ideal for back panel solutions and high-density situations.

SENKO MU Connectors are available in pre-assembled (one-piece) versions or unassembled kits. *When terminated using SENKO recommended procedures.

Applications

  • CATV
  • Metro
  • Active device termination
  • Premise Installations
  • Telecommunication networks
  • Local Area Networks (LANs)
  • Data processing networks
  • Premise installations
  • Wide Area Networks (WANs)
  • Industrial, medical & military

Features

  • NTT-MU hardware compatibility
  • NTT & JIS compliance*
  • Compact, pull-proof design
  • High precision alignment
  • One piece construction
  • Tunable zirconia connector ferrule
  • Corrosion resistant body
  • UL-Rated plastic housing and boot
  • Universal Duplex Clip
  • Low insertion loss & back reflection*

MU One Piece Connector

mu

The SENKO family of singlemode and multimode MU connectors and adapters are fully intermateable with NTT-MU style products, and are NTT and JIS compliant.* This small form factor connector is approximately half the size of the SC connector, and has a push-pull style design. The connector features a pre-assembled body and precision molded plastic housing, and a freefloating ferrule measuring 1.25mm O.D. held in place with a precision spring.

Housing and boot are made from UL-rated material. The MU-J style connector is the same as the regular MU connector, but without the outer housing, and with a very narrow, short boot for 900 micron fiber, ideal for back panel solutions and high-density situations.

SENKO MU Connectors are available in pre-assembled (one-piece) versions or unassembled kits. *When terminated using SENKO recommended procedures.

Applications

  • CATV
  • Metro
  • Active device termination
  • Premise Installations
  • Telecommunication networks
  • Local Area Networks (LANs)
  • Data processing networks
  • Premise installations
  • Wide Area Networks (WANs)
  • Industrial, medical & military

Features

  • NTT-MU hardware compatibility
  • NTT & JIS compliance*
  • Compact, pull-proof design
  • High precision alignment
  • One piece construction
  • Tunable zirconia connector ferrule
  • Corrosion resistant body
  • UL-Rated plastic housing and boot
  • Universal Duplex Clip
  • Low insertion loss & back reflection*

MU Connector Kit

mu

The MU connector kit is available for those who prefer to assemble the MU connector from its component parts. Kits are available for simplex, duplex, J-Plug (outer housing removed), simplex short and duplex short connector styles.

Housing is available in a variety of standard colors, with custom colors available upon request. Blue and lavender boots are available to fit 900 micron fiber and 2mm cable.

Custom boot colors are available upon request. *When terminated using SENKO recommended procedures.

Applications

  • CATV
  • Metro
  • Active device termination
  • Premise Installations
  • Telecommunication networks
  • Local Area Networks (LANs)
  • Data processing networks
  • Premise installations
  • Wide Area Networks (WANs)
  • Industrial, medical & military

Features

  • NTT-MU hardware compatibility
  • NTT & JIS compliance*
  • Compact, pull-proof design
  • High precision alignment
  • One piece construction
  • Tunable zirconia connector ferrule
  • Corrosion resistant body
  • UL-Rated plastic housing and boot
  • Universal Duplex Clip
  • Low insertion loss & back reflection*

MU Adapters

mu

SENKO MU Patch Panel Adapters are available in simplex, duplex and 8-port configurations, with zirconia sleeve for high-precision alignment.

MU Connectors are also available in pre-assembled (one-piece) versions, and in unassembled kits.

*When following procedures recommended by SENKO Advanced Components, Inc

Applications

  • Fiber optic subscriber network transmission/switching equipment
  • CATV
  • Active device termination
  • Telecommunication networks
  • Metro networks
  • Local Area Networks (LANs)
  • Data processing networks
  • Premise installations
  • Wide Area Networks (WANs)
  • Industrial, medical & military

Features

  • Compact design
  • NTT-MU hardware compatibility
  • NTT & JIS compliance
  • High precision alignment
  • Low insertion and return loss and back reflection*
  • Corrosion resistance

MU Crimp Tool

mu

SENKO MU Board Mount Adapters are specially designed for Printed Circuit Board (PCB) applications, and are available in simplex, duplex and 8-port configurations, with zirconia sleeve for high-precision alignment.

MU Connectors are also available in pre-assembled (one-piece) versions, and in unassembled kits.

*When following procedures recommended by SENKO Advanced Components, Inc

Applications

  • Printed Circuit Board mounting
  • Fiber optic subscriber network transmission/switching equipment
  • CATV
  • Active device termination
  • Telecommunication networks
  • Metro networks
  • Local Area Networks (LANS)
  • Data processing networks
  • Premise installations
  • Industrial, military and medical

Features

  • Compact design
  • NTT-MU hardware compatibility
  • NTT & JIS compliance
  • High precision alignment
  • Low insertion and return loss and back reflection*
  • Corrosion resistance

MU Backboard & Package Housing

mu

SENKO MU Backboard Housing is available in duplex and 8-port configurations, with styles suitable for 2.4mm and 3.2mm backboard thicknesses. This housing employs a self-retentive mechanism which takes the ferrule compression force off the back panel and enables greater packaging density than conventional optical back panel connectors. The mechanism incorporates two latches, a double shell back panel housing, and a floating back panel housing structure. When a printed circuit board is mated with the back panel, the printed circuit board housing latches directly to the inner housing of the back panel housing, which floats independently of the back panel outer housing. Ferrule compression force is absorbed by the connector latches and is not exerted on the back panel.

Back Panel Housing is composed of an inner and outer housing. Two pins join the housings, which are then inserted into backpanel footprint. Some clearance exists between the pin and the pin hole, allowing the outer housing to fit well, even if there is some difference in tolerances among packaging units. This MU connector can be mated with the inner housing through the sleeve holder, which slides inside the housing horizontally.

MU Package Housing is available in duplex and 8-port configurations and is used in applications where the MU-J Connector (no outer housing) is mounted on a Printed Circuit Board. The housing contains a sleeve holder, which mates with the back board housing. Once mated, the structure is designed to compensate for varying tolerances between packaging units, while maintaining alignment of the connectors found on either side

*When following procedures recommended by SENKO Advanced Components, Inc

Applications

  • CATV
  • Active device termination
  • Telecommunication networks
  • Metro networks
  • Local Area Networks (LANs)
  • Data processing networks
  • Premise installations
  • Industrial, military and medical

Features

  • Self retentive mechanism to reduce compression force
  • High packaging density
  • NTT-MU hardware compatibility
  • Easy installation, cleaning & maintenance
  • High precision alignment