• LC Mini Boot 3mm

  • LC Mini Boot 2mm

  • LC Mini Boot 900μm

  • LC Switchable Uniboot

The NEW LC MINI boot reduces the boot length up to 30% while maintaining superior cable support and bend radius as compared to traditional design boots. The short, flexible and compact design supports industry demanding TWAL standards

Features
- 40% Shorter in boot length (35 mm to 20 mm)
- Reduction of overall length from 57mm to 41mm (excluding tube)
- General usage for G652D (R-30 Fiber)
- Meets Criteria of GR-326 TWAL (1310, 1490, 1550, 1625) for G657B (R-7.5mm) Fiber and G657A (R-15mm) TWAL Test DATA Are available
- The 3mm MINI LC Boot will fit on all LC Connector family including the Unibody, 2pc standard and the Uniboot

The NEW LC MINI boot reduces the boot length up to 30% while maintaining superior cable support and bend radius as compared to traditional design boots. The short, flexible and compact design supports industry demanding TWAL standards

Features
- Over 30% Shorter in boot length compared to regular boot (from 29mm to 20mm)
- Reduction of overall length from 50 mm to 41 mm (excluding tube) and 65 mm to 49 mm (including tube)
- General usage for G652D (R-30 Fiber)
- Meets Criteria of GR-326 TWAL (1310, 1490, 1550, 1625) for G657B (R-7.5mm) Fiber and G657A (R-15mm) TWAL Test DATA Are available
- The 2mm MINI LC Boot will fit on all LC Connector family including the Unibody, 2pc standard and the Uniboot

The NEW LC MINI boot reduces the boot length up to 30% while maintaining superior cable support and bend radius as compared to traditional design boots. The short, flexible and compact design supports industry demanding TWAL standards

Features
- FIRST BTW BOOT that passes GR-326 TWAL test
- 900μm Flexible boot to support GR 326 Core issue 4 mechanical requirement
- General usage for G652D (R-30 Fiber)
- The 900μm Mini boot also passes the GR-326 TWAL test with R-7.5 fiber
- Same length as existing 900 μm BTW boot but flexible and passes the GR-326 TWAL test with R-7.5 fiber

The SENKO LC Duplex Switchable Connector with Mini Boot is a unique design that allows the use of round style, 2mm or 3mm jacketed cable Instead of the traditional zipcord duplex cable for a more compact design.

The housing of the LC Duplex SwitchaUe Connector can be taken apart In the field without the use of any special tooling. This duplex LC allows the fiber polarity to be switched at the time of cable assembly Installation without having to re-terminate the connectors.

The single piece design fits all duplex and simplex adapters. By using a single cable with two fibers, installers are able to cut their cable count and weight in half. This design is commonly used in data centers where cable counts are high and space limited.