• XP Fit Plus SC

  • The XP Fit Plus is a pre-polished, pre-assembled SC Connector...
  • XP Fit Plus LC

  • Without polishing or adhesives on site installation is quick and easy...
  • Installation Kit

  • The XP Fit Kit contains everyting needed for installation of the SC and LC connectors...
  • XP Mobile Support

  • With Senko, you are never alone in the field, just access our mobile support web app.

The XP Fit Plus is a pre-polished, pre-assembled SC connector that uses index matching gel. An internal mechanical grip, gently but effectively holds the fiber in place and can be installed in under 2 minutes. Without polishing or adhesives the XP Fit Plus makes on site installations quick and easy, diminishing the need for epoxy curing and hand polishing at the work site.

The XP Fit Plus comes with an assembling jig and fiber holder for 900µm tight buffered fiber which makes for an accurate and concise alignment and fiber cleave when terminating the connector. Following the guides on the assembling jig and fiber holder assembly is effortless, once the fiber is pushed into the connector and a click is heard the job is complete and the connector is ready for use in CATV, Telecommunication networks, multimedia and some FTTX applications.


Specification SM MM
dB IL PC 0.2 0.1
dB IL APC 0.3  
dB RL PC 55 35
dB RL APC 60  
Temperature (°C) -40° to +75°----------------
 
 
Applications
  • Local Area Networks (LANs)
  • Wide Area Networks (WANs)
  • Intra-building
  • Data and video transmission
Features
  • Epoxy-free crimp procedure
  • No need for curing oven
  • Termination in less than 2 minutes
  • Exceeds TIA/EIA-568-B.3 standards
  • UL rated boots available
* These are Typical specification value at 23°C.

The XP Fit Plus is a pre-polished, pre-assembled LC connector that uses index matching gel. An internal mechanical grip, gently but effectively holds the fiber in place and can be installed in under 2 minutes. Without polishing or adhesives the XP Fit Plus makes on site installations quick and easy, diminishing the need for epoxy curing and hand polishing at the work site.

The XP Fit Plus comes with an assembling jig and fiber holder for 900µm tight buffered fiber which makes for an accurate and concise alignment and fiber cleave when terminating the connector. Following the guides on the assembling jig and fiber holder assembly is effortless, once the fiber is pushed into the connector and a click is heard the job is complete and the connector is ready for use in CATV, Telecommunication networks, multimedia and some FTTX applications.


Specification SM MM
dB IL PC 0.2 0.1
dB RL PC 55 35
Temperature (°C) -40° to +75°----------------
 
 
Applications
  • Local Area Networks (LANs)
  • Wide Area Networks (WANs)
  • Intra-building
  • Data and video transmission
Features
  • Epoxy-free crimp procedure
  • No need for curing oven
  • Termination in less than 2 minutes
  • Exceeds TIA/EIA-568-B.3 standards
  • UL rated boots available
* These are Typical specification value at 23°C.

The Connector Installation Tool Kit contains everything needed for installation of the SC and LC XP FIT PLUS connectors. No epoxy, polishing film, or other consum- ables are required, and there is no need for electrical power, allowing installers to get in and out of installation sites quickly.

Features
  • Fast installation to minimize labour costs
  • Compatible with conventional LC& SC Connectors
  • Easy operation
  • Quick assembly in under 2 minutes
  • No adhesive or polishing required
  • Compact tool without electrical power



Tools
  • Jacket and 250µm Fiber Stripper + 125µm Buffer Remover
  • Thermal Buffer Removal Tool
  • Replacement Blade Set
  • Precision Cleave Tool (Flat)
  • Lint Free Dry Wipes
  • Fiber Optic Cleaning Pen
  • Kevlar Scissors
  • Fibre Disposal Unit
  • Fine Permanent Marker Pen
  • Fibre Checker
  • 2.5mm to 1.25mm Adapter
  • Soft Case
 

With Senko, you are never alone in the field. Just go to www.senko.com on your iPhone or other compatible device to access our mobile support web app. You'll find training videos, technical documents, and a direct line to live technical support for your area—everything you need to get your installation done right.

Key Features:

  • Watch training videos for your installation.
  • Read technical documents including product specifications and catalogue pages.
  • Contact live tech support via phone or email.

The Senko web app puts great customer service on your mobile device–when and where you need it.

   
News and Updates
E-mail for Technical inquiry
Dedicated Website
Technical training
1-888-32-SENKO
Online Technical Documentation
Follow Senko: