Skip to Main Content
  • Contact

1×4/ 1×8/ 1×16 Series

SENKO’s 1×4/1×8/1×16 Optical Switch series are based on opto-mechanical technology with high reliable quality. These switches are designed for optical multiplexers, cross-connect and network switching for fault/protection applications.

  • RoHS Compliant
  • Low Insertion Loss
  • Telcordia GR-1221 and GR-1073
PARAMETERS¹² VALUE
Types 1X4/1×8/1×16
Wavelength (nm) 1260~1630
Switch type 1×4 1×8 1×16
Insertion Loss Maximum (dB) 1.2 1.8 2
Wavelength Dependent Loss (dB) ≤0.3 ≤0.3 ≤0.5
Polarization Dependant Loss (dB) ≤0.1
Repeatability (dB) ±0.1
Cross Talk (dB) ≥60
Return Loss (dB) ≥55
Switching Time (ms) ≤5 ≤5 ≤10
Maximum Input Power (mW) 500
Switching Life (Cycles) 3×107
Operating Voltage Range (V) 4.5-5.5
Power Consumption (mW) 800±10% 1000±10% 1300±10%
Dimension (H x W x L) (mm) 18x100x100 18x100x100 18x130x140
Weight (g) 135 270 510
Fiber Type SMF-28e 250µm fiber or 0.9mm loose tube
Operating temperature (°C) -5~+70

Notes:
1. The specification shows for SM type only but MM type(850/1300nm) is available.
2. The parameters are not including connector performance.

Optical Network Protection and Storage

Network Switching

Instrumentation for Test and Measurement

logo-rosh
Reach logo
IEC logo
TIA logo

A fiber optic switch is a critical piece of hardware to fiber optic network infrastructure. The main function is to switch the optical path to separate channels in a controlled manner. This can be done remotely via a control device.

If you need to control the path of your optical signal, you may want to look into an optical switch. The Fiber Optic Switch enables many configurations and it’s possible to control traffic coming in or leaving a network. Unlike a splitter, the optical path can be blocked or unblocked on certain channels via remote control.

There are many different configurations that can be applied to custom applications. Feel free to contact us and we will help determine what the best path is for you.