|Senko Part Number:||AFT-T-DST-01|
|Applicable Drop Cable Size:||3.0mm x 2.0mm flat drop|
|Strip Range:||20mm to 60mm|
|Stripper Dimensions:||108mm (4.25″) length |
21mm (0.8″) width
58mm (2.3′) height with grips open
|Stripper Weight:||142g (0.3lb)|
The SENKO SMART STRIP FLAT DROP 3X2 tool is made for stripping off the jacket and cutting the dual strength rods of 3.0mm x 2.0mm flat drop cables. The stripper uses a dual cutting blade for making precise square cuts of the outer cable jacket and the dual stress rods made of metal or fiberglass. The SMART STRIP FLAT DROP 3X2 tool protects the cable’s fiber from nicks and scratches. The tool comes with an ease to use and view length guide to help you set the desired strip length. The SMART STRIP FLAT DROP 3X2 tool’s compact size and ease of use make it ideal for use on production lines, in kits and on installation sites using 3.0mm x 2.0mm flat drop cables.
Multiple Service Operators MSO
No. The cutting blades of the SMART STRIP FLAT DROP 3X2 are set up for cutting 3.0mm x 2.0mm flat drop cable. Senko does offer a 2.0mm x 1.6mm flat drop stripper and the part number is AFT-T-DST-02. Please contact your local Senko sales representative or email us at firstname.lastname@example.org for more information.
The blades of the SMART STRIP FLAT DROP STRIP 3X2 are made of tool grade steel and will last for many years of good service if you take care of the tool. Here are few tips for extending the life of your stripper.
- Keep your stripper dry and avoid leaving out in the elements for extensive amounts of time.
- Keep your tool clean. Periodically blow the inner jaws with compressed air to dislodge loose dust particles.
- Use the stripper for 3.0mm x 2.0mm flat cable only.
No. The stripper has two blades with a oval center. This feature protects fiber from nicks when you strip the flat drop’s cable jacket.
If you need to strip the fiber’s acrylate coating, you will need to use your fiber strippers.