Skip to Main Content
  • Contact
PARAMETERS¹² 1X2 1X4 1X8 1X16 1X32 1X64 2X2 2X4 2X8 2X16 2X32
Operating Wavelength (nm) 1260 ~1650
Insertion Loss, Max. (dB) 4.6 8 11.3 14.3 17.5 21.6 4.8 8.4 12.1 15.1 18.3
Uniformity (dB) 0.7 0.9 1.1 1.5 1.8 2.8 0.9 1.5 1.8 2.1 2.3
PDL, Max. (dB) 0.2 0.2 0.3 0.3 0.3 0.4 0.2 0.2 0.4 0.4 0.4
WDL (dB) 0.3 0.3 0.3 0.5 0.5 0.5 0.4 0.4 0.5 0.6 0.8
Return Loss, Min. (dB) UPC = 50 / APC = 55
Directivity Min. (dB) 55
Operating Temp. (°C) -40 ~ +85
Fiber Type Input/output:2mm/3mm Cable
Dimensions (mm) 100 (L) x 80 (W) x 10 (H) 120 (L) x 90 (W) x 15 (H) 100 (L) x 80 (W) x 10 (H) 120 (L) 80 (W) x 10 (H)

1. IL and RL are including connector’s performance.
2. Specification shown are at room temperature for 1310 and 1550nm.
3. All types of SM fiber are available.
4. Operating temperature is guaranteed up to 1m tube/cable length and excludes connectors.

Configurations are available in various NxM configurations, with various connector options. Custom packaging is also available.



Local Area Networks (LAN)

Cable TV (CATV)

Local Convergence Points (LCP)


Reach logo
IEC logo
TIA logo

A PLC splitter is an acronym for Planar Waveguide Circuit splitter. This technology is consider to be a passive optical device that can be configured with many input and output channels. It is used to divide input signals to multiple output signals uniformly. PLC splitters are commonly found in PON, Datacom, LAN, CATV, LCP, FTTx and more applications. PLC splitters provide a low-cost light distribution solution with high channels counts while maintain high stability and high reliability.

PLC splitters mimic semiconductor technology. The planar waveguide circuit technology consists of one chip and several optical arrays. The light travels into the input, and is then split across multiple paths. Depending on the output requirements, the splitting ratio can even reach 64 output channels. PLC splitters can either come in pigtail options for splicing, or in connectorized forms for easier deployment.

PLC splitters can be found in many passive optical network (PON) deployments. Commonly, a single fiber link from an Optical Line Terminal (OLT) is deployed and split across several channels to many Optical Network Terminals (ONT) . That signal is then taken and distributed to it’s destination for various FTTx situations.